107 E CEDAR ST, Bristol, TN 37620
CLASSIC PLASTIC, since 1975, using a unique manufacturing process, it was the first successfully produced and marketed lightweight autobody filler in the USA. Designed to save both time and money, it is easy to mix, apply and sand with less dust, air pollution, and waste. Smooth and creamy, affording a perfect featheredge, it is tack free, pinhole free; it cures quickly to a paintable hardness.
LIGHTEN-UP is an ultra lightweight self-etching autobody filler that eliminates bleed-through and topcoat staining. Tack free, pinhole free, and flexible, it bends with the metal for quicker, easier filling. Climatized to work in warm or cool temperatures.
Z-CHROME stain-resistant Lightweight Autobody Filler is self-etching for perfect adhesion at all metals. Tack free and pinhole free, it featheredges perfectly and is climatized for different areas of the country.
CLAW GLAS Short Strand self-etching Fiberglass Reinforced Body Filler is waterproof, tack free and creates a shield against moisture providing a moisture barrier for topcoats of filler as it bridges small rust-out areas as well as holes in metal and fiberglass parts.
GORILLA HAIR Long Strand Fiberglass Filler is waterproof, self-etching and tack free with tremendous strength for reinforcing large rust-out areas creating a superior bond. It stays put in very thick applications and can be forced into cracks and cervices. It can be used to rebuild shattered fiberglass panels and rotted-out sheet metal.
Z-GLAS Reinforced Fiberglass Filler, very strong because it is filled with microscopic fibers, is the only reinforced fiberglass filler that can be finished. It is self-etching, tack free, rust resistant, waterproof and is unequaled in smoothness.
CLAW GLASS BODY REPAIR KIGS for for easy metal or wood repairs.
CLAW GLAS FIBERGLASS CLOTH REINFORCEMENT for use with Claw Glas Resin is packaged in 8 and 24 sq. ft. sizes. For use with CLAW GLAS Fiberglass Resins with Clear Liquid Hardener.
CLAW GLAS Fiberglass Resin Quart and Gallon Repair Kits with fiberglass matting, reusable mixing cup, stick and gloves packaged with use instructions. For easy fiberglass, metal or wood repairs.
CLAW GLAS Fiberglass Body Quart and Gallon Repair Kits with Claw Glas Filler, sandpaper, disposable gloves, plastic spreader and screening material. For easy fiberglass, metal or wood repairs.
CLAW GLAS FIBERGLASS MAT REINFORCEMENT for use with Claw Glas Resin is packaged in 8 and 24 sq. ft. sizes. For use with CLAW GLAS Fiberglass Resins with Clear Liquid Hardener.
GLAW GLAS RESIN IS A MARINE GRADE POLYESTER RESIN, used for repair of metal, fiberglass and wood, provides excellent wet out properties along with tremendous adhesion. It is easy to work with and is typically used with cloth or mat reinforcements. A full-bodied fiberglass resin with clear liquid hardener.
ALL-U-NEED Ultimate Hi-Build, One Step, Polyester Primer-Surfacer-Sealer “Finishing System” is available in Light Gray, Dark Gray, Tan, White and Red. It replaces metal prep, etching primer, primer-surfacer and sealer. Containing 86% solids, it sands easily with no shrinkage. No recoat time, no sanding prior to recoating and no sanding after long periods of air dry, it sands the same after two years. Waterproof and solvent proof, self-etching to all ferrous and non-ferrous metals, fiberglass and wood, it is compatible with all paints and primers as well as repairs hail damage. As with our other innovative product ideas, a guide coat was developed within this product. The guide coat allows users to easily detect low or high areas in their panels.
RUST DEFENDER Hi-Build Polyester Primer is a one step “system” that primes, fills and seals bare metal, body filler, wood, aluminum, or fiberglass surfaces to accept any type of paint without concern about penetration of solvents or moisture. It has excellent resistance to heat, solvent attack, water, and salt. Non-shrinking and easy sanding, either wet or dry, it provides an excellent barrier between cured body filler and topcoats. Clear Coat/Color Coat paint systems are protected from the body filler when using this product. Highly prized among fine car restorationists.
SANDY Hi-Build Polyester Primer is designed to eliminate the multiple steps required by 2K primers to achieve a paintable surface; it primes, fills and seals and it cures in about 45 minutes at 78 degrees. It is recommended to be sprayed over bare metal, aluminum, fiberglass and even over old paint. It fills, levels, conditions and seals becoming a tough barrier quickly eliminating bleed-through. It sands easily, either wet or dry and cures to a very tough surface for painting. No other primer is needed.
GOLD RUSH Polyester Glazing Putty is premium lightweight gold self-etching glazing putty that is stain-free, tack free and pinhole free and eliminates the need to intermix both filler and putty to create a more user-friendly product.
Z-GLAZE Soft Sanding Lightweight Ultra White Polyester Glazing Putty is self-etching, tack-free, wet sandable and totally waterproof. It prevents bleedthrough and adheres to galvanized and zinc coated surfaces. Non-shrinking and pinhole free, it can be applied over cured primers.
CLAW PLAST Fiberglass Panel Adhesive and Filler is self-etching and can be economically used as an adhesive for filling and bonding fiberglass panels. Also designed for “bake” systems, it offers high heat resistance and provides an excellent painting surface.
SMOOTHOUT™ Resin Additive and Reducer is a honey smooth autobody filler thinner which thins out all autobody fillers to the desired consistency improving their workability.
PLASTIC SPREADERS, Molded polyethylene for fast, smooth, filler, resin, putty and adhesive applications. Reusable for fast, smooth body filler, resin, putty and adhesive applications, available in four sizes: 2 ¾” X 4,“ single edge, 3”X 5” single edge, 3 ½” X 6” single edge and 3 ½”X 6” double edge.
EXTRA CREAM HARDENERS for use with any brand of body filler, available in red or blue in 1 oz., 2 ¾ oz. and 4 oz. sizes. For use with any brand of body filler.
EXTRA RESIN LIQUID HARDENER for use with all brands of “marine” resin, available in 11 cc and 40 cc sizes.
EXTRA POLYESTER PRIMER HARDENER packaged in graduated plastic bottles for use only with Clausen brand polyester primers, Sandy, Rust Defender and All-U-Need, available in 11cc and 40 cc sizes.
